150000 MI or 240000 KM

Tighten/Torque
    Axle Beam
      Torque the rear U-bolts on axle beam.
Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.
    Vehicle
      Recommended Multi-point Inspection
    Valve Clearance
      Inspect valve clearances; adjust as necessary.
    Tie Rod End
      Inspect tie rod ends (lubricate if equipped with Zerk fittings)
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system concentration and hoses.
    Constant Velocity Joint Boot
      If equipped.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system.
    Ball Joint
      If equipped.
Replace
    Oil Filter, Engine
    Fluid Filter - A/T
      Change automatic transmission fluid filter (except for 6F35, 6F50, AWF-21, FNR5 and TorqShift transmissions).
    Fluid - A/T
      Change automatic transmission fluid (except for 6F35, 6F50, AWF-21, FNR5 and TorqShift transmissions).
    Engine Oil
      Change engine oil and filter.
    Drive Belt
      Replace accessory drive belt(s) if not replaced in the last 100,000 miles (160,000 km).
    Coolant
      Change engine coolant.
    Air Filter Element
      Replace engine air filter.
Rotate
    Tires
      Rotate tires, inspect for wear and measure tread depth.