Parking Aid

Parking Aid

The parking aid system consists of:

- Four ultrasonic parking aid sensors (located in the rear bumper cover)

- Parking Aid Module (PAM) and parking aid speaker (both located behind the LR quarter trim panel)

- Parking aid disable feature (integral to the Instrument Panel Cluster (IPC) message center)

The parking aid system calculates the distance to an object around the rear of the vehicle using 4 ultrasonic sensors. The parking aid system sounds a warning to alert the driver of stationary objects near the rear bumper when reverse is selected.

The rear sensors are activated when reverse is selected. The parking aid system assists the driver in detecting certain objects while the vehicle moves slowly in reverse at speeds of less than 4.8 km/h (3 mph). The parking aid system may not detect moving objects.

Video

The rear video camera system consists of the following:

- Video camera (located in the liftgate)

- Accessory Protocol Interface Module (APIM)

- Front Display Interface Module (FDIM)

- Instrument Panel Cluster (IPC)

- Body Control Module (BCM)

The video camera system visually aids the driver while reversing or reverse parking the vehicle. The video camera system features are as follows:

- Fixed guidelines- this feature assists the driver with backing into a parking space or aligning the vehicle with an object.

- Visual park aid alert- this feature assists the driver to visually see the object causing the parking aid system to sound.

- Manual zoom- this feature assists the driver with connecting or towing a trailer allowing the driver to manually zoom closer to an object behind the vehicle.

- Video camera delay- this feature allows the driver to see the image behind the vehicle after the vehicle is shifted out of reverse. The image will not be displayed if the vehicle is shifted into park.

The features are controlled though the FDIM (Front Display Interface Module). Refer to the Owner's Literature for information on how to operate the video camera system features.