Reading and Clearing Diagnostic Trouble Codes

Instrument Cluster (IC) Dealer Test Mode

NOTE: The table below uses XXX's to represent a numeric or alpha-numeric value. The value may display the same amount of characters represented by the XXX's or there may be more/less depending on the type of display. For example: F XXX may display F 125.

To enter the IC (Instrument Cluster) dealer test mode, press and hold the trip odometer reset button and turn the ignition switch to the RUN position. Release the trip odometer reset button when test is displayed in the integrated display area. This takes between 5 and 8 seconds (the IC (Instrument Cluster) enters the gauge sweep test). Press the trip odometer reset button to move through the tests. To exit the IC (Instrument Cluster) dealer test mode, hold the trip odometer reset button for greater than 3 seconds or turn the ignition switch to the OFF position.

Instrument Cluster (IC) Dealer Test Mode