Air Bag Front Sensor Assembly - Redesigned
90ford25 RESTRAINT SYSTEM - SUPPLEMENTAL AIR BAG - FRONT AND REAR SENSORSArticle No. 90-18-1
FORD: 1990 MUSTANG
ISSUE: The 1990 design air bag front sensor and bracket assembly mounted to the top of the radiator support assembly has been redesigned. The sensor will no longer function as a front safing sensor. The 1990 design rear sensor and bracket assembly attached to the inside surface of the driver's side "B-pillar" was also redesigned. The sensor will continue to function as a rear safing sensor.
ACTION: If service is required, install both the front and rear sensor and bracket assemblies. Refer to the part application chart for the correct service kit.
NOTE: THE REPLACEMENT PROCEDURES, ATTACHING POINTS AND FASTENERS HAVE NOT CHANGED.
CAUTION: THE AIR BAG SENSORS MUST BE REPLACED IN MATCHED SETS.
ALL 1990 MUSTANGS
All 1990 units can be serviced with the new design front and rear safing sensor assemblies.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Safety Restraint, Basic Warranty Coverage
OPERATION DESCRIPTION TIME
901801A Install Front & Rear 0.6 Hrs.
Sensors
DEALER CODING
BASIC PART NO. CONDITION CODE
14B006 53
OASIS CODES: 104000