Camshaft, Engine

GENERAL SPECIFICATIONS
Lobe Lift
Intake 8.2 mm (0.323 in)
Exhaust 8.6 mm (0.335 in)
Lobe Height
Intake 43.96-44.16 mm (1.7307-1.7386 in)
Limit 43.95 mm (1.7303 in)
Exhaust 44.314-44.514 mm (1.7446-1.7526 in)
Limit 44.304 mm (1.7443 in)
End Play
Standard 0.10-0.24 mm (0.0039-0.0094 in)
Journal to Bearing Clearance
Front 0.025-0.066 mm (0.0010-0.0026 in)
Others 0.021-0.026 mm (0.0008-0.0024 in)
Journal Diameter
Front 30.459-30.475 mm (1.1992-1.1998 in)
Others 24.959-24.975 mm (0.9826-0.9833 in)

TORQUE SPECIFICATIONS
Camshaft Bearing Caps to Cylinder head Bolts (1)

(1) Tighten in sequence in two steps:
- Tighten to 7-12 Nm (62-106 inch. lbs.)
- Tighten to 16-21 Nm (12-15 ft. lbs.)