Initial Inspection and Diagnostic Overview

1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical or electrical damage.

VISUAL INSPECTION CHART

Mechanical
^ Convertible top brackets and frame.
^ Hydraulic motor and pump.
^ Hydraulic lift cylinders.

Electrical
^ Central Junction Box (CJB) Fuse 20 (15 A).
^ Battery Junction Box (BJB) circuit breaker CONV TOP (25 A).
^ Wiring harness.
^ Loose or corroded connections.
^ Raise or lower relays.
^ Parking brake switch.
^ Convertible top switch.

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, verify the symptom and refer to the Symptom Chart. Symptom Related Diagnostic Procedures