Headlamp: Adjustments

1. Make sure the vehicle is on a flat, level surface with a wall or screen approximately 7.6 m (25 ft) in front.
2. Mark a 2.4 m (8 ft) horizontal reference line, or use masking tape, on the wall or screen.
3. Open the hood.
4. Turn on the low beam headlamps so that they illuminate the wall or screen.
5. A beam of high intensity light will be projected on the screen. If the beam is not centered, use a suitable tool to turn the vertical headlamp adjuster right or left until the beam aligns with the horizontal reference line.

NOTE: The headlamps cannot be adjusted horizontally.