Headlamp Switch: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the headlamp switch knob.
1 Pull the headlamp switch knob out.
2 Insert a thin tool into the slot, pull and remove the headlamp switch knob.







3. Remove the instrument panel cluster finish panel.
^ Remove the screws and remove the finish panel.







4. Remove the headlamp switch.
1 Remove the screws.
2 Remove the switch.
3 Disconnect the electrical connectors.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.