Transmission Mode Switch: Service and Repair

TRANSMISSION MODE SWITCH

Removal





1. Remove the shifter top control panel.





2. Disconnect the electrical connectors.





3. Remove the shifter bezel.





4. Remove the bulb from the bezel.





5. Disconnect the TCS connector.





6. CAUTION: Extra force may be needed to lift up on the handle. Do not to pull too far or damage to the overdrive cancel button may result, as the wires may be pulled out of the switch.

Remove the screw and the handle.





7. Remove the transmission control switch.

Installation
1. To install, reverse the removal procedure.