Wiper Motor: Description and Operation
WIPER MOTOR SPEEDHIGH and LOW
There are two wiper speeds, HIGH and LOW. When the GEM detects the ignition switch circuits are in the RUN or ACC states, and the GEM detects a high or low speed request from the wiper mode circuits, the GEM will activate the wiper ON and OFF and the wiper speed circuits accordingly.
Interval
There are one to seven wiper speed intervals, ranging from 1.5 seconds to 20 seconds in delay time respectively, which can be selected. When the GEM detects the ignition switch circuits are in the RUN or ACC states, and the GEM detects an interval selection of 1 through 7 from the delay/wash circuits, the GEM will activate the wiper ON and OFF and the wiper speed circuits accordingly.