Cylinder Block Assembly: Specifications
| Cylinder Bore | Diameter | 3.81 Inch (in) |
| Surface Finish (RMS) | 0.45 - 0.96 | |
| Out-of-Round Limit | 0.001 Inch (in) | |
| Out-of-Round Service Limit | 0.002 Inch (in) | |
| Taper Service Limit | 0.002 Inch (in) | |
| Main Bearing Bore Diameter | 2.712-2.713 Inch (in) | |
| Gasket Surface Flatness | 0.003 Inch (in) in 6.00 inches | |
| Head Gasket Surface Finish (RMS) | 2.0 Inch (in) at 0.85 inch | |
| Main Bearing Thrust Face | Surface Finish (RMS) | 0.354 Micro-Inches (micro-in) |