Flushing

Flushing

Special Tools:

Special Tool(s)

1. Once pressure is released, remove the pressure relief cap/radiator cap.
2. Drain the cooling system.
3. Remove the water thermostat.
4. Install the water hose connection without the water thermostat.

5. NOTE: For additional information, refer to the cooling system Flush-All Operating Instructions for specific vehicle hook-up.

Use cooling system Flush-All, Flush Kit and Drain Kit to flush the engine and radiator.
Use premium cooling system flush for vehicles filled with premium engine coolant.
6. Install the thermostat.
7. Back flush the heater core.
8. Fill the cooling system.