Input Shaft and Bearing

Input Shaft and Bearing

Special Tools And Equipment Part 1 Of 2:

Special Tools And Equipment Part 2 Of 2:

Special Tool(s)





Disassembly and Assembly





1. CAUTION: Use a vise with brass jaws or wood blocks.

Secure the input shaft in a vise. Using the special tools and a slide hammer, remove the input shaft bearing cup.
^ Inspect the cup for wear or damage. Install a new bearing cup and bearing as necessary.





2. Using the special tool and a press, remove the input shaft front bearing.
3. Inspect the input shaft and bearing for wear or damage. Install new components as necessary.





4. Using the special tools and a press, install a new input shaft bearing.
^ Lubricate the bearing with petroleum jelly.





5. Using a suitable driver and the press, install the input shaft bearing cup.
^ Lubricate the bearing cup with petroleum jelly.