Countershaft Bearing

Countershaft Bearing








Special Tool(s)

Disassembly





1. Using the special tool and a press, remove the countershaft bearing assembly.





2. CAUTION: Failure to correctly support the case (7005) during bearing race removal will result in permanent distortion of the case.

NOTE: Remove the front countershaft bearing race only if damaged or worn.

Using the special tools and a press, remove the bearing race and the countershaft front bearing seal.

Assembly





NOTE: Position the countershaft in the transmission case before installing the rear countershaft bearing.

1. Install the countershaft front bearing seal on the bearing race.
2. Coat the outside diameter of the bearing race with sealer.
^ Use Threadlock and Sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-5A.





3. CAUTION: Failure to correctly support the case during bearing race installation will result in permanent distortion of the case.

Using the special tools and, a press, install the bearing race.





4. Using the special tool and a press, install the front countershaft bearing.