Input Shaft and Bearing

Input Shaft and Bearing

Special Tools:

Special Tool(s)

Disassembly





1. Using the special tool and a press, remove the input bearing.





2. Remove the bearing race and the end play selective shims.
3. Remove the input shaft seal.

Assembly





1. Using the special tool, install the input shaft seal.





2. NOTE: In installing a new input shaft seal as part of a transmission overhaul, do not install the end play selective shims at this time.

Install the end play selective shims and the bearing race.





3. Using a press and a capped length of pipe, install the input bearing.