Headlamp: Service and Repair

HEADLAMP ASSEMBLY

Removal and Installation







1. Remove the pin-type retainers and the upper radiator air deflector.







2. Remove the screws and the radiator grille.
3. Raise and support the vehicle.







4. NOTE: Two bolts are located in the wheel well opening and not shown in the graphic.

Remove radiator lower air deflector.
1 Remove the 8 bolts.
2 Remove the pin-type retainers.







5. NOTE: If LH headlamp, remove the air cleaner assembly.

Remove the lower headlamp assembly bolt.

6. Lower the vehicle.







7. Remove the headlamp assembly.
- Disconnect the electrical connector.

8. To install, reverse the removal procedure.
- If necessary, adjust the headlamps.