Ignition Lock Cylinder - Functional

IGNITION LOCK CYLINDER - FUNCTIONAL

Removal and Installation
1. Disconnect the battery.







2. Position the lower instrument panel aside.







3. Disconnect the hood release cable and the data link connector (DLC) from the instrument panel and remove the lower instrument panel.







4. Remove the steering column upper shroud.
- Using a thin bladed screwdriver, release the 2 clips (one each side).







5. Remove the audio control switch (if equipped).
1 Using a thin bladed screwdriver, release the locking tang.
2 Disconnect the electrical connector.







6. Remove the steering column lower shroud.
1 Release the steering column locking lever.
2 Remove the screws.







7. Remove the ignition lock cylinder.
1 Insert and turn the ignition key to position I (Accessory).
2 Using a thin bladed screwdriver, press the detent.
3 Remove the lock cylinder.

8. To install, reverse the removal procedure.