Engine Controls - No Crank/DTC B1601/PATS Issues
TSB 04-23-411/29/04
NO CRANK WITH DIAGNOSTIC TROUBLE CODE
(DTC) B1601 AND/OR PATS SECURITY ACCESS
ISSUES
FORD:
2005 Focus
ISSUE
Some 2005 Focus vehicles may exhibit one or both of the following conditions:
^ No crank with diagnostic trouble code (DTC) B1601 (PATS Received Incorrect Key-Code From Ignition Key Transponder)
^ When PATS security access is attempted for this, or any other PATS issue, WDS will ask for a coded access "INCODE"
ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using WDS release B34.2 or higher. Clear all DTCs. If the condition is not corrected by PCM reprogramming, continue with normal diagnostics.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION DESCRIPTION TIME
042304A Check For Diagnostic 0.4 Hr.
Trouble Codes And
Reprogram Powertrain
Control Module
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 04
Disclaimer