Wheel Speed Sensor Front

Wheel Speed Sensor Front





Removal and Installation
1. With the vehicle in NEUTRAL, place it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the wheel speed sensor electrical connector.
3. Disconnect the 3 wheel speed sensor harness pin type retainers.
4. Disconnect the 2 wheel speed sensor grommet retainers from the brake hose clips.
5. Remove the wheel speed sensor bolt.
^ To install, tighten to 15 Nm (11 ft. lbs.).
6. Remove the wheel speed sensor and harness assembly.
7. To install, reverse the removal procedure.