Exterior Mirror

EXTERIOR MIRROR

Removal and Installation

NOTE: Do not remove the exterior mirror assembly when repairing an individual part. Individual components can be installed without removing the exterior mirror.

1. Remove the exterior mirror trim cover.
1 Release the retaining clip.
2 Disconnect the exterior mirror control switch electrical connector.

2. Disconnect the exterior mirror electrical connector.
3. Remove the exterior mirror bolt.
- To install, tighten to 11 Nm (8 lb-ft).

4. If equipped, remove the exterior mirror screw.
- To install, tighten to 2 Nm (18 lb-in).

5. Remove the exterior mirror.
6. To install, reverse the removal procedure.