Test D: The Speed Control Does Not Disengage When The Clutch Is Applied

PINPOINT TEST D: THE SPEED CONTROL DOES NOT DISENGAGE WHEN THE CLUTCH IS APPLIED

D1-D2:

Normal Operation
A clutch pedal position signal is sent to the speed control actuator through circuit 15S-PG17 (GN/BU). When the clutch pedal is applied, the speed control is deactivated.

Possible Causes
- Circuit 15S-PG17 (GN/BU) short to ground
- Speed control actuator
- Clutch pedal position (CPP) switch