Seat Belt Systems: Service Precautions
SAFETY BELT SYSTEMWARNING: All safety belt components (including retractors, belt tension sensor [BTS], buckles, front seat belt buckle support assemblies [slide bar] if equipped, shoulder belt height adjusters if equipped, child safety seat tether bracket assemblies, if equipped and attaching hardware) should be inspected after any collision. All new belt assemblies should be installed unless a qualified technician finds the assemblies show no damage and operate correctly. Safety belt assemblies not in use during a collision should also be inspected and new assemblies installed if either damage or incorrect operation is noted.
The automatic locking retractor (ALR) feature of the safety belt retractor must be checked by a qualified technician to verify that the ALR feature for a child seat is functioning correctly, in addition to other checks for correct safety belt system function. A new belt and retractor assembly must be installed if the safety belt assembly's "automatic locking retractor" feature, or any other safety belt function, is not operating correctly when inspected according to the functional inspection procedure. Failure to install a new belt and retractor assembly could increase the risk of injury in a collision.