Turn Signal Switch: Service and Repair

Steering Column Multifunction Switch





Removal and Installation
1. Remove the steering column upper shroud.
^ Using a suitable tool, release the 2 clips (one on each side).





2. Remove the audio control switch.
^ Using a suitable tool, release the locking tab.
^ Disconnect the electrical connector.
3. Remove the steering column lower shroud.
1 If equipped, release the steering column locking lever.
2 Remove the screws.





4. NOTE: LH multi-function switch shown, RH similar.

Disconnect the electrical connectors.





5. Remove the multi-function switch.
1 Press the locking tab.
2 Lift the multi-function switch upwards.
6. To install, reverse the removal procedure.