Reverse Clutch

Reverse Clutch

Special Tool(s):

Material:

Disassembly





1. Remove the reverse clutch pressure, friction and steel plates.
1 Remove the retaining ring.
2 Remove the plates.





2. Using the special tool, remove the reverse clutch piston return spring retainer ring and retainer.





3. Remove the reverse clutch piston return spring.





4. Remove the reverse clutch piston assembly.





5. CAUTION: If damage is found to the reverse clutch piston seals, install a new reverse clutch piston.

Inspect the seal bore in drum, inner and outer seals.

Assembly
1. Soak the internal spline clutch plates in clean automatic transmission fluid.





2. Lubricate and install the reverse clutch piston assembly.





3. Install the reverse clutch piston return spring.





4. Using the special tool, install the reverse clutch piston return spring retainer and retainer ring.





5. Install the reverse clutch pressure, friction and steel plates.
1 Install the plates.
2 Install the retaining ring.
^ Check the clearance.