Front Door: Service and Repair

DOOR







Removal and Installation

NOTE: Front door shown, rear door similar.

1. Disconnect the front door electrical connector at the A-pillar.

2. CAUTION:
- To minimize the possibility of cross threading, hand start all fasteners during the installation.
- To avoid damaging the door, this step requires the help of an assistant.

Mark the position of each hinge and remove the hinge-to-door bolts.
- To install, tighten to 30 Nm (22 lb-ft).

3. Remove the front door.
4. To install, reverse the removal procedure.
- If necessary, align the door. For additional information, refer to Door Alignment. Adjustments