Test K: The Autolock Does Not Operate Correctly

PINPOINT TEST K: THE AUTOLOCK DOES NOT OPERATE CORRECTLY

NOTE: The autolock feature is not available on manual transmission equipped vehicles.

Normal Operation
The autolocking function causes the vehicle to automatically lock all the doors when the following conditions are all concurrently met during the current key cycle:
- All doors are closed
- Autolocking function is active
- Key in ON position
- Brake pedal is applied and vehicle speed is less than 8 km/h (5 mph)
- Vehicle speed exceeds 8 km/h (5 mph)

Relock occurs after a door is opened, the brake pedal is applied while the vehicle speed is less than 8 km/h (5 mph), all the doors are closed again, and the vehicle speed increases to 8 km/h (5 mph) or greater.

This pinpoint test is intended to diagnose the following:
- SJB

K1:

K2-K4: