Wheel Speed Sensor - Rear

Wheel Speed Sensor - Rear





Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the wheel speed sensor electrical connector.
3. Disconnect the 2 wheel speed sensor harness pin-type retainers.
4. Disconnect the wheel speed sensor grommet retainer from the brake hose clip.
5. Remove the wheel speed sensor bolt.
^ To install, tighten to 15 Nm (11 lb-ft).
6. Remove the wheel speed sensor.
7. To install, reverse the removal procedure.