Fog/Driving Lamp: Service and Repair

Fog Lamp

Sedan










Coupe









Removal and Installation

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

Sedan or coupe

1. With the vehicle in NEUTRAL, position it on a hoist.

Sedan

2. Release the tabs and remove the fog lamp bezel from the front bumper cover.

Coupe

3. For the RH fog lamp, remove the horn.

4. For the LH fog lamp on Partial Zero Emissions Vehicle (PZEV) vehicles, remove the air cleaner.

Sedan or coupe

5. Disconnect the fog lamp electrical connector.

6. Remove the 4 screws and the fog lamp.

7. To install, reverse the removal procedure.
- If necessary, adjust the fog lamps. For additional information, refer to Front Fog Lamp Adjustment Adjustments.