Main Control Valve Body

4F27E

Main Control Valve Body









Disassembly

1. Remove the solenoid body bolts and the solenoid body.





2. Remove and discard the solenoid body gaskets.





3. Remove and discard the seals.





4. Disassemble the main control valve body.





Assembly

1. Install a new separator plate and gasket assembly.





2. NOTE: Do not fully tighten the bolts at this stage.

Assemble the main control valve body and loosely install the bolts.





3. Install the seals.





4. Install a new solenoid body gasket.





5. Install the solenoid body and loosely install the bolts.





6. Tighten the solenoid body bolts in the sequence shown.
- Tighten to 9 Nm (80 lb-in).