Window Glass - Front Door

Window Glass - Front Door





Removal and Installation

1. Remove the front door speaker.

2. NOTE: Do not touch the adhesive surface during removal or installation of the watershield, as re-bonding will be impaired. If additional adhesive is required during installation, apply seam sealer as necessary to completely seal the watershield to the inner door.

Remove the watershield.

3. Temporarily install the window control switch or the window regulator handle to raise or lower the window to access the glass clamp bolts.

4. Loosen the 2 door window glass clamp bolts.
- To install, tighten to 8 Nm (71 lb-in).

5. Tape the window in position, then lower the window regulator downward until it reaches the stops at the bottom of the regulator tracks.

6. Remove the window glass.

1. Lift the glass.

2. Tip the glass forward and remove the glass from the front of the door.





7. To install, reverse the removal procedure.