Hybrid System - Wrench Lamp ON/DTC U3000:46 Set
TSB 11-7-2707/25/11
HYBRID ONLY - WRENCH LAMP AND DTC
U3000: 46 - BUILT ON OR BEFORE 11/30/2009
FORD:
2010 Fusion
MERCURY:
2010 Milan
ISSUE
Some 2010 Fusion Hybrid and Milan Hybrid vehicles built on or before 11/30/2009 may exhibit the wrench lamp illuminating accompanied by diagnostic trouble code (DTC) U3000:46.
ACTION
Reprogram the Battery Energy Control Module (BECM) to the latest calibration using IDS release 73.04 and higher or 74.01 and higher. This new calibration is not included in the VCM 2011.7 DVD. Calibration and IDS patch files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
110727A 2010 Fusion, Milan Hybrid: 0.3 Hr.
Check DTCs And
Reprogram The BECM (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
10B687 04
Disclaimer