Air Cleaner

Air Cleaner

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the LH fender splash shield.

3. Disconnect the Mass Air Flow (MAF) sensor electrical connector.

4. Loosen the clamp and disconnect the Air Cleaner (ACL) outlet pipe from the ACL assembly.
- To install, tighten to 4 Nm (35 lb-in).

5. Remove the 3 nuts, release the ACL intake pipe and remove the ACL assembly.
- To install, tighten to 15 Nm (133 lb-in).

6. To install, reverse the removal procedure.