Fog/Driving Lamp: Service and Repair

Fog Lamp

Sedan









Coupe









Removal and Installation

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

Sedan or coupe

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

Sedan

2. Release the tabs and remove the fog lamp bezel from the front bumper cover.

Coupe

3. For the RH fog lamp, remove the horn. For additional information, refer to Horn Service and Repair.

4. For the LH fog lamp on Partial Zero Emissions Vehicle (PZEV) vehicles, remove the air cleaner. For additional information, refer to Intake Air Distribution and Filtering Air Cleaner.

Sedan or coupe

5. Disconnect the fog lamp electrical connector.

6. Remove the 4 screws and the fog lamp.

7. To install, reverse the removal procedure.
- If necessary, adjust the fog lamps. For additional information, refer to Front Fog Lamp Adjustment Adjustments.