Engine Controls - MIL ON/DTC's P0301-P0308 Set
TSB 11-7-307/07/11
5.0L - DTCS P0301 THRU P0308 AND/OR P050E
AND P2610 - BUILT ON OR AFTER 8/17/2010
FORD:
2011 Mustang
ISSUE
Some 2011 Mustang vehicles equipped with a 5.0L engine and built on or after 8/17/2010 may exhibit a malfunction indicator lamp (MIL) on with one or more of the following diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM) memory: P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, PO5OE, or P2610.
ACTION
Reprogram the PCM to the latest calibration using IDS release 73.04 or later. This new calibration is not included in the VCM 2011.5 DVD. Calibration files may also be obtained at the website.
NOTE
PLEASE ADVISE THE CUSTOMER THAT THIS VEHICLE IS EQUIPPED WITH AN ADAPTIVE TRANSMISSION SHIFT STRATEGY WHICH ALLOWS THE VEHICLE'S COMPUTER TO LEARN THE TRANSMISSION'S UNIQUE PARAMETERS AND IMPROVER SHIFT QUALITY. WHEN THE ADAPTIVE STRATEGY IS RESET, THE COMPUTER WILL BEGIN A RE-LEARNING PROCESS. THIS RE-LEARNING PROCESS MAY RESULT IN FIRMER THAN NORMAL UPSHIFTS AND DOWNSHIFTS FOR SEVERAL DAYS.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
110703A 2011 Mustang: Check 0.3 Hr.
DTCs, And Reprogram
The PCM (Do Not Use
With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECALEM 04
Disclaimer