Automatic Transmission/Transaxle: Adjustments

Selector Lever Cable Adjustment

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Place the transmission selector lever in the D position.

3. Lift the lock upward on the transmission selector cable lock and remove the transmission selector cable from the selector lever.





4. Place the transmission manual control lever in the D position by rotating the manual lever clockwise to the extent of travel, then rotate counterclockwise 3 detents.

5. Install the transmission selector lever cable on the selector lever and push the lock downward to lock the transmission selector lever cable adjustment lock.