Powertrain Controls - ECM/PCM

CODE 32 SHIFT SOLENOID "B"

Code Chart 32:

Transaxle Valve Body Circuit:

CIRCUIT DESCRIPTION:

Based on the signal from the ECU, the oil circuits are changed to control shifting, lock-up operation and engine braking. When shift solenoid "B" is engaged, the economy mode is activated and the transaxle shifts according to vehicle speed, not throttle opening.

TEST DESCRIPTION: Numbers below refer to the circled numbers on the diagnostic chart.

1. With DVM, there should be B+ at BRN/RED wire with key "ON."

2. There should be B+ with drive wheels turning in second gear.

3. Resistance of solenoid should be 20 to 30 ohms.

DIAGNOSTIC AIDS:

A faulty connection or an open or short in the BRN/RED wire can result in a Code 32. An intermittent may be caused by a poor connection, rubbed through wire insulation or a wire broken inside the insulation.