Tools - Front Suspension Hub Bearing and Seal

9216chevy02

Number: 90-343-3C

Section: 3C

Date: September 1990

Corporate Bulletin No.: 033303


Subject:
FRONT SUSPENSION HUB BEARING AND SEAL


Model and Year:
1990 GEO STORM


TO: ALL CHEVROLET DEALERS

This bulletin cancels and supersedes the hub, bearing and seal assembly procedure found on page 3C-8 in the 1990 GEO Storm Service Manual.

Assemble Tools Required:

J 38284 Hub Bearing Installer
J 38287 Outer Oil Seal Installer
J 38285 Inner Oil Seal Installer
J 38236 Knuckle Support

1. Bearing assembly into the knuckle using a J 38284 hub bearing installer.

2. Inner snap ring.

3. Outer seal using a J 38287 outer seal installer.

4. Inner seal using a J 38285 inner seal installer.

5. Hub into bearing using a J 38236 knuckle support and a J 38284 hub and bearing installer.