Lighting and Horns: Testing and Inspection

1. For lamps that will not light.


^ Check that the fuse used to power the lamp is good by checking other lamps powered by the same fuse.


^ Check the ground wires of the affected lamps for opens.

^ Check that the TURN/HAZARD RELAY is securely mounted in its connector.

2. For lamps that remain lit.


^ Check the wire to the connector of the affected lamp for a short to voltage.


^ Check that the TURN/HAZARD RELAY is not stuck closed.

3. Check that grounds G101, G102, G103, G201, G403 and G404 are clean and tight.