Instrument Cluster Replacement

Fig. 9 Instrument Cluster Assembly:

1. Disconnect battery ground cable.
2. Remove four screws attaching cluster switch panel to instrument panel.
3. Disconnect electrical connectors from switches, then pull instrument cluster bezel and switch panel slightly outward as an assembly.
4. Remove six screws attaching cluster bezel to switch panel.
5. Remove front windshield wiper switch and headlamp and hazard warning lamp switch from switch panel.
6. Remove four instrument cluster housing attaching screws from switch housing.
7. Disconnect instrument cluster electrical connectors and speedometer cable.
8. Remove instrument cluster, Fig. 9.
9. Reverse procedure to install.