Crankshaft Dimensions

Engine Liter/VIN 1.0L/6

All Measurements Given In Inches Unless Otherwise Specified

Crankshaft
Standard Journal Diameter
Main Bearing [02]
Crank Pin 1.6529-1.6535
Out of Round All [01] 0.0004
Taper All [01] 0.0004
Bearing Clearance
Main Bearings 0.0008-0.0023
Connecting Rod Bearings 0.0012-0.0031
Thrust Bearing Clearance 0.0044-0.0122
Connecting Rod Side Clearance 0.0039-0.0078

[01] Maximum.
[02] The counter weights of No. 1 cylinder have four stamped numbers, they indicate journal diameters at bearing caps respectively. No. 1, 1.7714-1.7716 inches] No. 2, 1.7712-1.7714 inches & No. 3, 1.7710-1.7712 inches.