Troubleshooting Hints - Gauges and Warning Indicators

PROCEDURE
1. Check the GAUGE Fuse with a fuse tester.
2. Check the DOME Fuse with a fuse tester.
3. Check that the Audio Alarm Module is securely mounted in Junction Block 1.
4. Check that engine coolant level is adequate for ECT Gauge operation.
5. Check that fuel level is adequate for Fuel Gauge operation.
6. Check that oil level is adequate for Oil Pressure Indicator operation.
7. Check that grounds G106, G200, and G202 are clean and tight.
8. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections.