Slips In 1ST Gear

1. Low transaxle fluid level.
2. Improperly adjusted, binding or damaged TV cable.
3. Improperly adjusted, binding or damaged shift select cable.
4. Manual valve binding or sticking.
5. Throttle valve binding or sticking.
6. B2 control valve sticking.
7. Accumulator pistons damaged or leaking.
8. Accumulator seals cut or damaged.
9. Damaged accumulator springs.
10. Clutch discs worn.
11. Forward clutch piston or seal leaking or damaged.
12. Input shaft O-rings out or damaged.
13. One-way clutch not holding or damaged.