Crankshaft Position Sensor: Service and Repair

Crankshaft Position (CKP) Sensor:

CRANKSHAFT POSITION SENSOR REPLACEMENT

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Crankshaft Position (CKP) Sensor electrical connector. Raise and suitably support vehicle.
3. One bolt and CKP sensor from vehicle.

INSTALL OR CONNECT
1. CKP sensor to vehicle; secure with one bolt. Tighten CKP sensor nut to 9.3 Nm (82 lb in).
^ Lower vehicle
2. CKP sensor electrical connector.
3. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).