Knee Bolster Replacement

Knee Bolster Assembly:

Remove or Disconnect
1. Three screws at bottom of knee bolster trim panel.
2. Pull away gently left side of knee bolster trim panel, then separate right side from instrument panel.
3. Two plastic clips and energy absorber.
4. Four screws and knee bolster from instrument panel.

Install or Connect
1. Knee bolster; secure with four bolts.

Tighten
^ Knee bolster bolts to 10 Nm (89 lb in).

2. Energy absorber, secure with two clips.
3. Knee bolster trim panel; secure with three screws.