Instrument Panel Cluster Printed Circuit Replacement

Gage Mounting Screws (Typical):

Remove or Disconnect
1. Negative (-) battery cable.
2. Instrument cluster from instrument panel.
3. All bulb sockets from back of cluster assembly.

IMPORTANT:
Note location of bulb sockets for proper installation.

4. Screws from back of instrument cluster assembly
5. Printed circuit from back of instrument cluster assembly.

Install or Connect
1. Printed circuit to back of instrument cluster assembly; secure with screws.
2. All bulb sockets to back of instrument cluster assembly.
3. Instrument cluster to instrument panel.
4. Negative (-) battery cable.