Sealed Beam Headlamp Bulb Replacement

Sealed Beam Headlamp Assembly (Base Models):

Remove or Disconnect
1. Negative (-) battery cable.
2. Two screws and sealed beam headlamp trim from vehicle.
3. Parking lamp socket.
4. Four screws and sealed beam headlamp retaining ring from vehicle.
5. Sealed beam headlamp bulb electrical connector.
6. Sealed beam headlamp bulb from vehicle.

Install or Connect
1. Sealed beam headlamp bulb to vehicle.
2. Sealed beam headlamp bulb electrical connector.
3. Sealed beam headlamp retaining ring to vehicle; secure with four screws.
4. Parking lamp socket to sealed beam headlamp trim.
5. Sealed beam headlamp trim to vehicle; secure with two screws.
6. Negative (-) battery cable.

Adjust
^ Sealed beam headlamp aim.