Control Module HVAC: Service and Repair

Remove or Disconnect
1. Disable the SRS.
2. Negative (-) battery cable.
3. I/P compartment.

Description:

4. One screw and right vent tube.
5. A/C amplifier electrical connector.

Description:

6. One bolt and A/C amplifier from evaporator case.

Install or Connect
1. A/C amplifier to evaporator case; secure with bolt.
2. A/C amplifier electrical connector.
3. Right vent tube; secure with one screw.
4. I/P compartment to vehicle.
5. Negative (-) battery cable. Refer to Battery.
6. Enable the SRS.