Manual

Torque Specifications

Actuator And Line Bracket 20 Nm (15 lb ft)
Backup Switch 40 N.m (30 lb. ft.)
Bearing Lock Bolts 11 N.m (97 lb. in.)
Fifth Gear Locknut 118 N.m (87 lb. ft.)
Front Bearing Retainer Bolts 11 N.m (97 lb. in.)
Lock Ball Assembly Plugs 13 N.m (115 lb. in.)
Number 3 Fork Shaft Lock Oil Receiver Bolts 16 N.m (12 lb. ft.)
Oil Receiver Bolts 11 N.m (97 lb. in.)
Reverse Idler Shaft Lock Bolt 39 N.m (29 lb. ft.)
Reverse Shift Arm Bolts 17 N.m (13 lb. ft.)
Ring Bearing Retainer Bolts 27 N.m (20 lb. ft.)
Ring Gear Bolts 77 N.m (57 lb. ft.)
Select Control Lock Bolt 29 N.m (22 lb. ft.)
Shift and Select Lever Assembly Bolts 20 N.m (14 lb. ft.)
Shift Shaft Lock Bolts 16 N.m (12 lb. ft.)
Transaxle Case Bolts 29 N.m (22 lb. in.)
Transaxle Case Cover Bolts 18 N.m (13 lb. ft.)
Backup Switch 20 Nm (15 lb ft)
Center Crossmember-To-Radiator:
Support 61 Nm (45 lb ft)
Control Assembly Bolts 12 Nm (106 lb in)
Front Exhaust Pipe Support Bolts 19 Nm (14 lb ft)
Front Mount:
Mounting Bolts 64 Nm (47 lb ft)
Through Bolt 87 Nm (64 lb ft)
Front Suspension Crossmember Bolts 206 Nm (152 lb ft)
Inspection Cover Bolts 61 Nm (45 lb ft)
Left Transaxle Mounting Bracket Bolts 56 Nm (41 lb ft)
Left Mount:
Cover 21 Nm (15 lb ft)
Through Bolt 87 Nm (64 lb ft)
Left Splash Shield Bolts 5 Nm (44 lb in)
Lower A Frame-To-Underbody:
Center Bolt 218 Nm (161 lb ft)
Outer Bolt 147 Nm (109 lb ft)
Oil Drain Plug 39 Nm (29 lb ft)
Oil Fill Plug 39 Nm (29 lb ft)
Rear Mount Through Bolt 87 Nm (64 lb ft)
Rear Mounting Nuts 57 Nm (42 lb ft)
Starter Bolts 39 Nm (29 lb ft)
Steering Knuckle-To-Front Control Arm:
Bolts And Nuts 142 Nm (105 lb ft)
Transaxle-To-Engine 46 Nm (34 lb ft)
Upper Transaxle Mount Bolt 61 Nm (45 lb ft)
Vehicle Speed Sensor (VSS) Retaining Bolt 11 Nm (97 lb in)