Tools - Low Pressure Gauge For A/T Available

90honda05
Model Applicable To
ALL with
ALL automatic
transmission
File Under Bulletin No.
84-058
SPECIAL
TOOLS Issue Date
OCT 22, '84
Governor valve pressure and throttle valve A pressure in Honda automatic transmissions must be measured to within 0.1 kg/sq. cm. (2 psi). Such a small tolerance is difficult to read accurately on the existing gauge set which has a range of 0-30 kg/sq. cm. (0-425 psi). To solve this problem, we've made available a low pressure gauge which has a range of only 0-10 kg/sq. cm. (0-145 psi).



CAUTION: This gauge is intended for governor and throttle valve pressure checks. If you use it to check line pressure or clutch pressures, make sure you disconnect it before doing any stall tests; the high pressures generated by stall testing will damage it.



Add a note like this to the "Pressure Test" page in the Automatic Transmission section of your Service Manuals.