No. 1 Indicator Is Lit

Fig. 47 PGM-FI Self-diagnosis chart:

NOTE: It is possible for the ECU to store this code because of extended driving in hot weather. To correct this condition, install a "purge jet", part number 99105-PG7-000AH as outlined.

1. Remove the red braided hose from the top of the throttle body.
2. Install the purge jet about one inch into the red braided hose. It does not matter which way the jet is installed into the hose.
3. Reconnect the hose, remove the No. 10 fuse from the dash fuse box for ten seconds. This will clear the stored codes in the ECU.
4. Test drive the car and verify the code does not return. If the code does return, continue with the diagnosis charts.